Japon | eSIM 5G | Pass journalier/Forfait complet | Facturation 24H | 1-30 jours | Code QR
À propos de cette expérience
Lancez-vous dans votre aventure japonaise sans perdre le rythme ! Avec notre eSIM 5G, vous profiterez d'une connectivité fluide à travers tout le pays, vous permettant de partager vos expériences en temps réel. Que vous flâniez dans les rues animées de Tokyo, savouriez des sushis à Osaka ou vous imprégniez de la beauté sereine de Kyoto, rester connecté n'a jamais été aussi simple. Activez simplement votre eSIM via un code QR — aucune carte SIM physique n'est nécessaire — et plongez dans les merveilles du Japon avec des données 4G et 5G haut débit au bout des doigts.
Choisissez parmi une variété de forfaits adaptés à vos besoins de voyage, allant de 1 à 30 jours. Grâce à des options de facturation flexibles, vous pouvez sélectionner le forfait de données qui correspond à votre utilisation, qu'il s'agisse d'une navigation légère ou d'un streaming intensif. Compatible avec la plupart des appareils prenant en charge l'eSIM, cette solution sans tracas vous permet de naviguer, d'explorer et de partager votre voyage sans interruption. Découvrez le Japon comme jamais auparavant, entièrement connecté et prêt pour l'aventure !
À quoi s'attendre
À votre arrivée au Japon, vous constaterez que l'activation de votre eSIM est un jeu d'enfant. Scannez simplement le code QR et, en quelques instants, vous serez connecté au réseau robuste du Japon, prêt à explorer tout ce que cet incroyable pays a à offrir. Que vous utilisiez les transports en commun, recherchiez les meilleurs restaurants locaux ou partagiez vos moments de voyage sur les réseaux sociaux, vous aurez la puissance de l'internet haut débit directement dans votre poche.
Alors que vous voyagez des villes animées aux temples tranquilles, l'eSIM vous permet de rester connecté sans les tracas liés au changement de carte SIM. Avec des forfaits flexibles adaptés à votre itinéraire de voyage, vous pouvez ajuster votre consommation de données selon vos besoins, vous assurant d'être toujours en ligne quand cela compte le plus. Profitez de votre voyage à travers le Japon en sachant que vous pouvez vous connecter sans effort au monde qui vous entoure.
Points forts
- Activation instantanée via code QR — aucune carte SIM physique requise
- Profitez d'une couverture de données 5G/4G LTE haut débit dans tout le Japon
- Cycle de facturation flexible de 24 heures à partir du moment de l'activation
- Disponible pour des durées allant de 1 à 30 jours
- Configuration facile compatible avec la plupart des appareils prenant en charge l'eSIM
- Choisissez parmi divers forfaits de données pour répondre à vos besoins
- Parfait pour les voyageurs souhaitant rester connectés lors de leurs déplacements
Informations importantes
- Assurez-vous que votre appareil est compatible avec l'eSIM avant l'achat.
- Vérifiez les limites de données de votre forfait choisi pour éviter les frais de dépassement.
- Gardez votre code QR en sécurité ; il est essentiel pour l'activation.
- Tenez compte de vos besoins en données en fonction de vos activités de voyage.
- Activez votre eSIM dès votre arrivée pour une connectivité immédiate.
- Restez informé des réglementations locales sur l'utilisation des données pour maximiser votre expérience.
Ce que pensent les visiteurs
Questions fréquentes
Le forfait eSIM 5G comprend un accès aux données haut débit pour la durée sélectionnée, avec des options allant de 0,5 Go à 100 Go. L'activation est instantanée via un code QR, ce qui facilite la connexion tout en explorant le Japon.
Choisir votre forfait
Sélectionnez l'option qui vous convient
Code QR-2 jours-Quotidien - 3 Go
Choisir une date
juillet 2026
Quantité
$1.80 chacun
Choisir une date
juillet 2026
Quantité
$1.80 chacun
Code QR-2 jours-Quotidien - 2 Go
Non remboursable
À partir de
$1.45
par personne
Code QR-2 jours-Quotidien - 1 Go
Non remboursable
À partir de
$0.95
par personne
Code QR-2 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$0.75
par personne
Code QR-1 jour-Quotidien - 100 Go
Non remboursable
À partir de
$1.55
par personne
Code QR-1 jour-Quotidien - 3 Go
Non remboursable
À partir de
$0.85
par personne
Code QR-1 jour-Quotidien - 2 Go
Non remboursable
À partir de
$0.80
par personne
Code QR-1 jour-Quotidien - 1 Go
Non remboursable
À partir de
$0.60
par personne
Code QR-1 jour-Quotidien - 0,5 Go
Non remboursable
À partir de
$0.35
par personne
Code QR-25 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$5.65
par personne
Code QR-20 jours-Quotidien - 100 Go
Non remboursable
À partir de
$19.10
par personne
Code QR-20 jours-Quotidien - 3 Go
Non remboursable
À partir de
$14.95
par personne
Code QR - 20 jours - Quotidien - 2 Go
Non remboursable
À partir de
$10.90
par personne
Code QR - 20 jours - Quotidien - 1 Go
Non remboursable
À partir de
$5.80
par personne
Code QR-20 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$4.20
par personne
Code QR-15 jours-Total - 50 Go
Non remboursable
À partir de
$14.30
par personne
Code QR-15 jours-Total - 30 Go
Non remboursable
À partir de
$9.55
par personne
Code QR - 15 jours - Total - 20 Go
Non remboursable
À partir de
$7.20
par personne
Code QR-15 jours-Total - 10 Go
Non remboursable
À partir de
$4.10
par personne
Code QR-15 jours-Quotidien - 100 Go
Non remboursable
À partir de
$15.05
par personne
Code QR - 15 jours - Quotidien - 3 Go
Non remboursable
À partir de
$11.40
par personne
Code QR-15 jours-Quotidien - 2 Go
Non remboursable
À partir de
$8.20
par personne
Code QR - 15 jours - Quotidien - 1 Go
Non remboursable
À partir de
$4.45
par personne
Code QR - 15 jours - Quotidien - 0,5 Go
Non remboursable
À partir de
$3.20
par personne
Code QR-14 jours-Quotidien - 100 Go
Non remboursable
À partir de
$14.15
par personne
Code QR-14 jours-Quotidien - 3 Go
Non remboursable
À partir de
$10.70
par personne
Code QR - 14 jours - Quotidien - 2 Go
Non remboursable
À partir de
$7.90
par personne
Code QR-14 jours-Quotidien - 1 Go
Non remboursable
À partir de
$4.30
par personne
Code QR - 14 jours - Quotidien - 0,5 Go
Non remboursable
À partir de
$3.15
par personne
Code QR-12 jours-Quotidien - 100 Go
Non remboursable
À partir de
$12.50
par personne
Code QR-12 jours-Quotidien - 3 Go
Non remboursable
À partir de
$9.35
par personne
Code QR-12 jours-Quotidien - 2 Go
Non remboursable
À partir de
$6.90
par personne
Code QR-12 jours-Quotidien - 1 Go
Non remboursable
À partir de
$4.00
par personne
Code QR-12 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$3.15
par personne
Code QR-10 jours-Total - 50 Go
Non remboursable
À partir de
$13.25
par personne
Code QR-10 jours-Total - 30 Go
Non remboursable
À partir de
$8.90
par personne
Code QR-10 jours-Total - 20 Go
Non remboursable
À partir de
$6.40
par personne
Code QR-10 jours-Total - 10 Go
Non remboursable
À partir de
$3.70
par personne
Code QR-10 jours-Quotidien - 100 Go
Non remboursable
À partir de
$10.70
par personne
Code QR-10 jours-Quotidien - 3 Go
Non remboursable
À partir de
$7.90
par personne
Code QR - 10 jours - Quotidien - 2 Go
Non remboursable
À partir de
$5.90
par personne
Code QR-10 jours-Quotidien - 1 Go
Non remboursable
À partir de
$3.75
par personne
Code QR-10 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$2.40
par personne
Code QR-9 jours-Quotidien - 100 Go
Non remboursable
À partir de
$9.85
par personne
Code QR-9 jours-Quotidien - 3 Go
Non remboursable
À partir de
$7.20
par personne
Code QR-9 jours-Quotidien - 2 Go
Non remboursable
À partir de
$5.35
par personne
Code QR-9 jours-Quotidien - 1 Go
Non remboursable
À partir de
$3.30
par personne
Code QR-9 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$2.20
par personne
Code QR-8 jours-Quotidien - 100 Go
Non remboursable
À partir de
$8.80
par personne
Code QR-8 jours-Quotidien - 3 Go
Non remboursable
À partir de
$6.35
par personne
Code QR-8 jours-Quotidien - 2 Go
Non remboursable
À partir de
$4.80
par personne
Code QR-8 jours-Quotidien - 1 Go
Non remboursable
À partir de
$3.00
par personne
Code QR-8 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$2.00
par personne
Code QR-7 jours-Total - 50 Go
Non remboursable
À partir de
$12.70
par personne
Code QR-7 jours-Total - 30 Go
Non remboursable
À partir de
$8.55
par personne
Code QR-7 jours-Total - 20 Go
Non remboursable
À partir de
$6.10
par personne
Code QR-7 jours-Total - 10 Go
Non remboursable
À partir de
$3.40
par personne
Code QR-7 jours-Total - 5 Go
Non remboursable
À partir de
$2.05
par personne
Code QR-7 jours-Quotidien - 100 Go
Non remboursable
À partir de
$7.55
par personne
Code QR - 7 jours - Quotidien - 3 Go
Non remboursable
À partir de
$5.55
par personne
Code QR-7 jours-Quotidien - 2 Go
Non remboursable
À partir de
$3.95
par personne
Code QR-7 jours-Quotidien - 1 Go
Non remboursable
À partir de
$2.75
par personne
Code QR-7 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$1.85
par personne
Code QR-6 jours-Quotidien - 100 Go
Non remboursable
À partir de
$6.70
par personne
Code QR-6 jours-Quotidien - 3 Go
Non remboursable
À partir de
$4.90
par personne
Code QR-6 jours-Quotidien - 2 Go
Non remboursable
À partir de
$3.70
par personne
Code QR-6 jours-Quotidien - 1 Go
Non remboursable
À partir de
$2.40
par personne
Code QR-6 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$1.55
par personne
Code QR-5 jours-Total - 50 Go
Non remboursable
À partir de
$12.15
par personne
Code QR-5 jours-Total - 30 Go
Non remboursable
À partir de
$8.15
par personne
Code QR-5 jours-Total - 20 Go
Non remboursable
À partir de
$5.90
par personne
Code QR-5 jours-Total - 10 Go
Non remboursable
À partir de
$3.20
par personne
Code QR-5 jours-Total - 5 Go
Non remboursable
À partir de
$1.90
par personne
Code QR-5 jours-Total - 3 Go
Non remboursable
À partir de
$1.45
par personne
Code QR - 5 jours - Quotidien - 100 Go
Non remboursable
À partir de
$5.70
par personne
Code QR-5 jours-Quotidien - 3 Go
Non remboursable
À partir de
$4.00
par personne
Code QR-5 jours-Quotidien - 2 Go
Non remboursable
À partir de
$2.95
par personne
Code QR-5 jours-Quotidien - 1 Go
Non remboursable
À partir de
$2.00
par personne
Code QR-5 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$1.40
par personne
Code QR-4 jours-Quotidien - 100 Go
Non remboursable
À partir de
$4.75
par personne
Code QR-4 jours-Quotidien - 3 Go
Non remboursable
À partir de
$3.30
par personne
Code QR-4 jours-Quotidien - 2 Go
Non remboursable
À partir de
$2.50
par personne
QR code-4 jours-Quotidien - 1 Go
Non remboursable
À partir de
$1.70
par personne
Code QR-4 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$1.20
par personne
Code QR-3 jours-Total - 50 Go
Non remboursable
À partir de
$12.15
par personne
Code QR-3 jours-Total - 30 Go
Non remboursable
À partir de
$8.30
par personne
Code QR-3 jours-Total - 20 Go
Non remboursable
À partir de
$5.60
par personne
Code QR-3 jours-Total - 10 Go
Non remboursable
À partir de
$3.05
par personne
Code QR-3 jours-Total - 5 Go
Non remboursable
À partir de
$1.80
par personne
Code QR-3 jours-Total - 3 Go
Non remboursable
À partir de
$1.35
par personne
Code QR - 3 jours - Total - 1 Go
Non remboursable
À partir de
$0.85
par personne
Code QR - 3 jours - Quotidien - 100 Go
Non remboursable
À partir de
$3.70
par personne
Code QR - 3 jours - Quotidien - 3 Go
Non remboursable
À partir de
$2.50
par personne
Code QR-3 jours-Quotidien - 2 Go
Non remboursable
À partir de
$2.00
par personne
Code QR-3 jours-Quotidien - 1 Go
Non remboursable
À partir de
$1.25
par personne
Code QR-3 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$0.85
par personne
Code QR-2 jours-Quotidien - 100 Go
Non remboursable
À partir de
$2.75
par personne
Code QR-30 jours-Total - 50 Go
Non remboursable
À partir de
$15.30
par personne
Code QR-30 jours-Total - 30 Go
Non remboursable
À partir de
$10.15
par personne
Code QR-30 jours-Total - 20 Go
Non remboursable
À partir de
$7.35
par personne
Code QR-30 jours-Quotidien - 100 Go
Non remboursable
À partir de
$27.35
par personne
Code QR-30 jours-Quotidien - 3 Go
Non remboursable
À partir de
$22.00
par personne
Code QR-30 jours-Quotidien - 2 Go
Non remboursable
À partir de
$14.90
par personne
Code QR-30 jours-Quotidien - 1 Go
Non remboursable
À partir de
$8.60
par personne
Code QR-30 jours-Quotidien - 0,5 Go
Non remboursable
À partir de
$5.70
par personne
Code QR-25 jours-Quotidien - 100 Go
Non remboursable
À partir de
$23.25
par personne
Code QR-25 jours-Quotidien - 3 Go
Non remboursable
À partir de
$18.45
par personne
Code QR-25 jours-Quotidien - 2 Go
Non remboursable
À partir de
$12.90
par personne
Code QR-25 jours-Quotidien - 1 Go
Non remboursable
À partir de
$7.20
par personne
QR code-20 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$70.25
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-30 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$100.80
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-25 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$85.70
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$55.20
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-14 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$51.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-12 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$45.80
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-10 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$39.15
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-9 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$36.05
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-8 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$32.05
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$27.50
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-6 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$24.30
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$20.65
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-4 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$17.10
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-100GB/day (Unrestricted Speed)
Non remboursable
À partir de
$13.25
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-30 days-Total 50GB
Non remboursable
À partir de
$15.60
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-30 days-Total 30GB
Non remboursable
À partir de
$10.35
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-30 days-Total 20GB
Non remboursable
À partir de
$7.45
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-30 days-100GB/day
Non remboursable
À partir de
$27.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-30 days-3GB/day
Non remboursable
À partir de
$22.30
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-30 days-2GB/day
Non remboursable
À partir de
$15.10
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-30 days-1GB/day
Non remboursable
À partir de
$8.70
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-30 days-0.5GB/day
Non remboursable
À partir de
$5.80
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-25 days-100GB/day
Non remboursable
À partir de
$23.60
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-25 days-3GB/day
Non remboursable
À partir de
$18.75
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-25 days-2GB/day
Non remboursable
À partir de
$13.10
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-25 days-1GB/day
Non remboursable
À partir de
$7.30
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-25 days-0.5GB/day
Non remboursable
À partir de
$5.75
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-20 days-100GB/day
Non remboursable
À partir de
$19.40
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-20 days-3GB/day
Non remboursable
À partir de
$15.15
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-20 days-2GB/day
Non remboursable
À partir de
$11.05
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-20 days-1GB/day
Non remboursable
À partir de
$5.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-20 days-0.5GB/day
Non remboursable
À partir de
$4.25
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-Total 50GB
Non remboursable
À partir de
$14.50
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-Total 30GB
Non remboursable
À partir de
$9.65
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-Total 20GB
Non remboursable
À partir de
$7.30
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-Total 10GB
Non remboursable
À partir de
$4.20
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-100GB/day
Non remboursable
À partir de
$15.25
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-3GB/day
Non remboursable
À partir de
$11.60
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-2GB/day
Non remboursable
À partir de
$8.30
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-1GB/day
Non remboursable
À partir de
$4.50
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-15 days-0.5GB/day
Non remboursable
À partir de
$3.25
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-14 days-100GB/day
Non remboursable
À partir de
$14.35
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-14 days-3GB/day
Non remboursable
À partir de
$10.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-14 days-2GB/day
Non remboursable
À partir de
$8.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-14 days-1GB/day
Non remboursable
À partir de
$4.35
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-14 days-0.5GB/day
Non remboursable
À partir de
$3.20
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-12 days-100GB/day
Non remboursable
À partir de
$12.70
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-12 days-3GB/day
Non remboursable
À partir de
$9.45
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-12 days-2GB/day
Non remboursable
À partir de
$7.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-12 days-1GB/day
Non remboursable
À partir de
$4.05
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-12 days-0.5GB/day
Non remboursable
À partir de
$3.20
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-10 days-Total 50GB
Non remboursable
À partir de
$13.40
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
Non remboursable
À partir de
$9.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-10 days-Total 20GB
Non remboursable
À partir de
$6.50
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-10 days-Total 10GB
Non remboursable
À partir de
$3.75
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-10 days-100GB/day
Non remboursable
À partir de
$10.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-10 days-3GB/day
Non remboursable
À partir de
$8.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-10 days-2GB/day
Non remboursable
À partir de
$6.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-10 days-1GB/day
Non remboursable
À partir de
$3.80
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-10 days-0.5GB/day
Non remboursable
À partir de
$2.40
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-9 days-100GB/day
Non remboursable
À partir de
$10.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-9 days-3GB/day
Non remboursable
À partir de
$7.25
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-9 days-2GB/day
Non remboursable
À partir de
$5.40
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-9 days-1GB/day
Non remboursable
À partir de
$3.35
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-9 days-0.5GB/day
Non remboursable
À partir de
$2.25
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-8 days-100GB/day
Non remboursable
À partir de
$8.90
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-8 days-3GB/day
Non remboursable
À partir de
$6.45
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-8 days-2GB/day
Non remboursable
À partir de
$4.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-8 days-1GB/day
Non remboursable
À partir de
$3.05
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-8 days-0.5GB/day
Non remboursable
À partir de
$2.05
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-Total 50GB
Non remboursable
À partir de
$12.90
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-Total 30GB
Non remboursable
À partir de
$8.65
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-Total 20GB
Non remboursable
À partir de
$6.20
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-Total 10GB
Non remboursable
À partir de
$3.45
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-Total 5GB
Non remboursable
À partir de
$2.05
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-100GB/day
Non remboursable
À partir de
$7.65
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-3GB/day
Non remboursable
À partir de
$5.60
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-2GB/day
Non remboursable
À partir de
$4.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-1GB/day
Non remboursable
À partir de
$2.75
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-7 days-0.5GB/day
Non remboursable
À partir de
$1.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-6 days-100GB/day
Non remboursable
À partir de
$6.80
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-6 days-3GB/day
Non remboursable
À partir de
$4.95
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-6 days-2GB/day
Non remboursable
À partir de
$3.75
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-6 days-1GB/day
Non remboursable
À partir de
$2.40
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-6 days-0.5GB/day
Non remboursable
À partir de
$1.55
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-Total 50GB
Non remboursable
À partir de
$12.30
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-Total 30GB
Non remboursable
À partir de
$8.40
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-Total 20GB
Non remboursable
À partir de
$5.95
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-Total 10GB
Non remboursable
À partir de
$3.25
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-Total 5GB
Non remboursable
À partir de
$1.90
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-Total 3GB
Non remboursable
À partir de
$1.45
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-100GB/day
Non remboursable
À partir de
$5.80
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-3GB/day
Non remboursable
À partir de
$4.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-2GB/day
Non remboursable
À partir de
$3.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-1GB/day
Non remboursable
À partir de
$2.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-5 days-0.5GB/day
Non remboursable
À partir de
$1.40
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-4 days-100GB/day
Non remboursable
À partir de
$4.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-4 days-3GB/day
Non remboursable
À partir de
$3.35
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-4 days-2GB/day
Non remboursable
À partir de
$2.55
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-4 days-1GB/day
Non remboursable
À partir de
$1.70
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-4 days-0.5GB/day
Non remboursable
À partir de
$1.20
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-Total 50GB
Non remboursable
À partir de
$12.30
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-Total 30GB
Non remboursable
À partir de
$8.30
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-Total 20GB
Non remboursable
À partir de
$5.70
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-Total 10GB
Non remboursable
À partir de
$3.10
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-Total 5GB
Non remboursable
À partir de
$1.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-Total 3GB
Non remboursable
À partir de
$1.40
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-Total 1GB
Non remboursable
À partir de
$0.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-100GB/day
Non remboursable
À partir de
$3.75
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-3GB/day
Non remboursable
À partir de
$2.55
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-2GB/day
Non remboursable
À partir de
$2.00
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-1GB/day
Non remboursable
À partir de
$1.25
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-3 days-0.5GB/day
Non remboursable
À partir de
$0.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-2 days-100GB/day
Non remboursable
À partir de
$2.75
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-2 days-3GB/day
Non remboursable
À partir de
$1.80
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-2 days-2GB/day
Non remboursable
À partir de
$1.45
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-2 days-1GB/day
Non remboursable
À partir de
$0.95
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-2 days-0.5GB/day
Non remboursable
À partir de
$0.75
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-1 day-100GB/day
Non remboursable
À partir de
$1.55
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-1 day-3GB/day
Non remboursable
À partir de
$0.85
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-1 day-2GB/day
Non remboursable
À partir de
$0.80
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-1 day-1GB/day
Non remboursable
À partir de
$0.55
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
QR code-1 day-0.5GB/day
Non remboursable
À partir de
$0.35
par personne
À propos de ce billet
[Install eSIM] Before installation, please make sure: 1. Your device supports eSIM and is not carrier-locked. 2. Your phone is connected to a stable mobile network or Wi-Fi. After the first installation, the eSIM will be bound to the current device and cannot be installed on or transferred to another device. Please confirm your device before installation. Method 1: One-Tap Installation Tap the “Install” button in the Trip.com app or use the “One-Tap Install” link in your order voucher to complete installation.(iOS 17.4 or later is required for iOS devices.) Method 2: Scan QR Code / Manual Installation (Universal) 1. Open the QR code attachment in your Trip.com order and print it out or save it on another device in advance. (For iOS 17 or above and some Android devices, the QR code image can be saved directly to the phone.) 2. Go to “Settings” → “Cellular/Mobile Data” (iOS) or “SIM Card Manager” (Android). 3. With your phone connected to the internet, tap “Add eSIM/Add Cellular Plan” (iOS) or “Add SIM” (Android), then scan the QR code to install. 4. If scanning is not possible, you can manually enter the “SM-DP+ Address” and “Activation Code” provided in your order. 5. If Steps 3 or 4 fail, your device may be carrier-locked (restricted to a specific network). Please contact your carrier to unlock it before installing the eSIM. [Activate eSIM] Please complete the following settings after arriving at your destination: 1. Turn off your primary SIM (or disable mobile data on the primary SIM) and enable the eSIM. 2. Activate the eSIM: iOS: Go to “Cellular/Mobile Data” and select and enable the eSIM. Android: Go to “SIM Card Manager/SIM Cards”, enable the eSIM, and set it as the mobile data SIM. 3. Turn on “Data Roaming”. 4. If you still cannot access the internet after the above steps, please configure the APN and restart your phone. See details below. [About APN] 1. Path to set APN: iOS: “Settings” → “Cellular” → “Cellular Data Network” Android: “Settings” → “Mobile Network/Cellular Network” → “Access Point Names (APN)” 3. Enter APN: cmhk 4. Restart your phone. [Using the Renewal Data Plan] The renewal plan will be activated automatically once your current plan expires. Please do NOT scan the QR code again. 1. For plans with “high-speed data followed by reduced speed”: reduced-speed data will continue to be used until the original plan expires. Restart your phone to start using the renewal plan. (If you need to end it earlier, please contact customer support.) 2. For plans with “high-speed data only (no data after usage)”: after the high-speed data is used up, restart your phone to start using the renewal plan. If you want to use the eSIM on another device, please select “Book Again” instead of “Request Renewal”. Renewal plans cannot be transferred to another device.
[Install eSIM] Before installation, please make sure: 1.
